Product identification

• Hidraoil Part number: GFX101850
• Brand of product: Danfoss
• Part number: 151B3006 OMT 160
• Other numbers: 151B 3006 OMT160

Description

• Hydraulic orbital motor Danfoss (former Sauer Danfoss) for applications requiring high Torque at low / medium Speed.
  Shaft type: Splined from 17 dientes con diámetro exterior 38,1 mm.
  Flange type: Estándar from 4 taladros con centraje from diámetro 125 mm y diámetro from 160 mm entre centros from taladros.
  Gerotor/Geroller width : 16,5 mm.
  Displacement: 161,1 cm3/rev.
  Side Ports: G3/4 Threaded Ports (3/4" BSPP).
  Drain Port: G1/4 Threaded Port (1/4" BSPP)
  Max speed: 625 rpm (intermittent operation: 780 rpm).
  Max. Torque: 470 Nm (intermittent operation: 560 Nm).
  Max. Output Power: 26,5 kW (intermittent operation: 32 kW).
  Max. Pressure Drop: 200 bar (intermittent operation: 240 bar; peak load:280 bar).
  Max oil flow: 100 liters/minute (intermittent operation: 125 liters/minute).
  Max. starting pressure with unloaded shaft: 10 bar.
  Min. starting torque at max. press. drop cont.: 340 Nm.
  Min. starting torque at max. press. drop int.: 410 Nm
  Intermittent operation: the permissible values may occur for max. 10% of every minute.
  Peak load: the permissible values may occur for max. 1% of every minute.