Product identification

• Hidraoil Part number: GFX101854
• Brand of product: Danfoss
• Part number: 151B3010 OMT 400
• Other numbers: 151B 3010 OMT400

Description

• Hydraulic orbital motor Danfoss (former Sauer Danfoss) for applications requiring high Torque at low / medium Speed.
  Shaft type: Splined from 17 dientes con diámetro exterior 38,1 mm.
  Flange type: Estándar from 4 taladros con centraje from diámetro 125 mm y diámetro from 160 mm entre centros from taladros.
  Gearwheel set case width (L1): 47,5 mm
  Displacement: 410,9 cm3/rev.
  Side Ports: G3/4 Threaded Ports (3/4" BSPP)
  Drain Port: 1/4" GAS
  Max speed: 305 rpm (intermittent operation: 365 rpm)
  Max. Torque: 1080 Nm (intermittent operation: 1260 Nm)
  Max. Output Power: 30 kW (intermittent operation: 35 kW)
  Max. Pressure Drop: 180 bar (intermittent operation: 210 bar; peak load:240 bar)
  Max oil flow: 125 liters/minute (intermittent operation: 150 liters/minute)
  Max. starting pressure with unloaded shaft: 10 bar
  Min. starting torque at max. press. drop cont.: 840 Nm
  Min. starting torque at max. press. drop int.:970 Nm
  Intermittent operation: the permissible values may occur for max. 10% of every minute.
  Peak load: the permissible values may occur for max. 1% of every minute.