Product identification

• Hidraoil Part number: GFX105204
• Brand of product: Danfoss
• Part number: 151B3109 OMV 800
• Other numbers: 151B 3109 OMV800

Description

• Hydraulic orbital motor OMV from manufacturer Danfoss (former Sauer Danfoss) for hydraulic equipment requiring high Torque at low / medium Speed.
  Shaft type: Splined from 16 dientes con diámetro exterior 53.95 mm.
  Flange type: Square 4 holes Flange with 160 mm centering diameter and 200 mm diameter between hole centers.
  Displacement: 801.8 cm3/rev.
  Side Ports: Threaded 1" GAS.
  Drain Port: G1/4 Threaded Port (1/4" BSPP).
  Max speed: 250 rpm (intermittent operation: 300 rpm).
  Max. Torque: 1880 Nm (intermittent operation: 2110 Nm).
  Max. Output Power: 42.5 kW (intermittent operation: 48 kW).
  Max. Pressure Drop: 160 bar (intermittent operation: 180 bar; peak: 210 bar).
  Max oil flow: 200 liters/minute (intermittent operation: 240 liters/minute).
  Max. starting pressure with unloaded shaft: 8 bar.
  Min. starting torque at max. press. drop cont.: 1510 Nm.
  Min. starting torque at max. press. drop int.: 1700 Nm.
  Intermittent operation: the permissible values may occur for max. 10% of every minute.
  Peak load: the permissible values may occur for max. 1% of every minute.