Product identification

• Hidraoil Part number: GFX105205
• Brand of product: Danfoss
• Part number: 151B3110 OMV 315
• Other numbers: 151B 3110 OMV315

Description

• Hydraulic orbital motor OMV from manufacturer Danfoss (former Sauer Danfoss) for hydraulic equipment requiring high Torque at low / medium Speed.
  Shaft type: Tapered con diámetro mayor from 60 mm y chaveta from ancho 16 mm.
  Flange type: Square 4 holes Flange with 160 mm centering diameter and 200 mm diameter between hole centers.
  Displacement: 314.5 cm3/rev.
  Side Ports: G1 Threaded Ports (1" BSPP).
  Drain Port: G1/4 Threaded Port (1/4" BSPP)
  Max speed: 510 rpm (intermittent operation: 630 rpm).
  Max. Torque: 920 Nm (intermittent operation: 1110 Nm).
  Max. Output Power: 42.5 kW (intermittent operation: 51 kW).
  Max. Pressure Drop: 200 bar (intermittent operation: 240 bar; peak: 280 bar).
  Max oil flow: 160 liters/minute (intermittent operation: 200 liters/minute).
  Max. starting pressure with unloaded shaft: 8 bar.
  Min. starting torque at max. press. drop cont.: 710 Nm.
  Min. starting torque at max. press. drop int.: 850 Nm.
  Maximum inlet pressure: 210 bar (intermittent operation: 250 bar; peak: 300 bar).
  Maximum return pressure with drain line: 140 bar (intermittent operation: 175 bar; peak: 210 bar).
  Intermittent operation: the permissible values may occur for max. 10% of every minute.
  Peak load: the permissible values may occur for max. 1% of every minute.