Product identification

• Hidraoil Part number: GFX105213
• Brand of product: Danfoss
• Part number: 151B3128 OMVS 630
• Other numbers: 151B 3128 OMVS630

Description

• Hydraulic orbital motor OMV from manufacturer Danfoss (former Sauer Danfoss) for hydraulic equipment requiring high Torque at low / medium Speed.
  Shaft type: Splined tipo cardan.
  Flange type: Redonda con fijación mediante 4 taladros, centraje from diámetro 140 mm y 180 mm from diámetro entre centros from taladros.
  Displacement: 629.1 cm3/rev.
  Side Ports: G1 Threaded Ports (1" BSPP).
  Drain Port: G1/4 Threaded Port (1/4" BSPP)
  Max speed: 315 rpm (intermittent operation: 380 rpm).
  Max. Torque: 1660 Nm (intermittent operation: 1940 Nm).
  Max. Output Power: 48 kW (intermittent operation: 56 kW).
  Max. Pressure Drop: 180 bar (intermittent operation: 210 bar; peak: 240 bar).
  Max oil flow: 200 liters/minute (intermittent operation: 240 liters/minute).
  Max. starting pressure with unloaded shaft: 8 bar.
  Min. starting torque at max. press. drop cont.: 1330 Nm.
  Min. starting torque at max. press. drop int.: 1550 Nm.
  Maximum inlet pressure: 210 bar (intermittent operation: 250 bar; peak: 300 bar).
  Maximum return pressure with drain line: 140 bar (intermittent operation: 175 bar; peak: 210 bar).
  Intermittent operation: the permissible values may occur for max. 10% of every minute.
  Peak load: the permissible values may occur for max. 1% of every minute.